Anyone know if there is any kind of a spray nozzle on the inside of the black tank at the saniflush connection to do a good job of cleaning all areas of the tank, or do they assume city water pressure will do the job at a bunk type tank connection? I have a well and at times can only have 20-30 PSI pressure. This fall I used a garden sprayer through the toilet opening to make sure things got a good cleaning. Not sure it was all that necessary. but certainly didn't hurt.
The San-T-Flush systems do have a spray nozzle already installed.
But if your water pressure is that low: you might best hook up to City Water in order to get the best use out of it.
__________________
"What: me worry?"
Good Sam Member 843599689
Current coach: Tiffin Wayfarer 24 BW
When I clean my black tank I will allow the black tank flush system to fill the tank to 3/4 then open the valve. I do this a few times (4 or 5) until I see almost clear water coming out the black tank drain.
__________________
Dave
US Army (Ret)
2020 Entegra Accolade 37TS
2019 Jeep Grand Cherokee Trailhawk (Toad)
FMCA - F432054
When I clean my black tank I will allow the black tank flush system to fill the tank to 3/4 then open the valve. I do this a few times (4 or 5) until I see almost clear water coming out the black tank drain.
When I clean my black tank I will allow the black tank flush system to fill the tank to 3/4 then open the valve. I do this a few times (4 or 5) until I see almost clear water coming out the black tank drain.