“No signal” on cameras

[WearyTraveler]

Today the cameras, both back and turn, started acting wonky (a technical term). The cameras come and go. At first, the bumps in the road would cause them to go on of off. When we hit a bump I’d get “no signal.” Then another bump and it’d be back. When we get to Florida I’ve got a LOT of things to fix. Has anyone had something similar and can point me at a possible solution? I’m hoping that since it’s all three cameras that it is a loose plug under the dash. It’s on the Axxera radio.

[The Gritz Carlton]

You're on it!!

[Trkyte@msn.com]

Ditto

[lwmcguire]

If you don't find a loose plug, check the circuit breaker next

[16ACE27]

Originally Posted by lwmcguire

If you don't find a loose plug, check the circuit breaker next

There is no circuit breaker involved with the cameras or radio; it is a 12 VDC system.

[lwmcguire]

Originally Posted by 16ACE27

There is no circuit breaker involved with the cameras or radio; it is a 12 VDC system.

Well his may be different but mine gets power from the 30 amp 12v automatic circuit breaker which is the way a the Tuscany Coaches are wired

It also powered the passenger seat