Originally Posted by Pete'sMH
I hate when that happens! Not a lot to go on here…why did you replace the shore power cable? What relays did you replace? And was it before or after the problems began? Does “no generator” mean it won’t even turn over or that it’s not making power? You indicate that the 12V is working but what is your voltage? Really, the only place common to both shore and generator power is the ATS. Is that what you replaced? Time to get your volt meter out and see how far into your coach your shore power is getting and exactly where it is interrupted. Patient, methodical troubleshooting should turn up your problem. Good luck.
Thank you for the reply. I should have given more info in first thread...
Shore power cable had no continunitity in the hot (black) side of the cable. I thought that was my prob. I made my own cable and I get 120 volts to the transfer switch and to the breaker box (30 Amp breaker) then no power after that. I had the 3 tandom breakers in my garage so I replaced the 30/20, 15/15, 15/15.
The generator will not start. That is what I meant. I tried to hit the switch from the driver seat and to start it at the generator itself.