2007 hurricane 34j slides will not work

[Stephan_M]

I'm am looking for trouble shooting information for the slide pump motor on my 2007 hurricane 34B. Not sure of the name brand can't find a data plate but it has two solonoids.

[javelin]

Does the attached 2007 manual provide any value? There is a little on the hydraulic levelers and slides valve body assignments, but probably too general for what you were wanting. Maybe the manufacturer (if still around) can be identified on the equipment or from this manual and provide some information for you. If you still have a build list mounted somewhere in your coach the hydraulics maker etc may be noted there if not right on the pump/valve body. Good luck.


https://www.rvroundtable.com/wp-cont...nersManual.pdf

[16ACE27]

Is the slide pump motor separate from the levelers pump motor or is it an Integrated System?

[Beau388]

Originally Posted by Stephan_M

I'm am looking for trouble shooting information for the slide pump motor on my 2007 hurricane 34B. Not sure of the name brand can't find a data plate but it has two solonoids.

Usually the hydraulic slides and jacks use the same pump and valve system. It is probably a Power Gear system. Power Gear was bought by LCI some time ago but Lippert still services most Power Gear parts and can supply the manuals.

[javelin]

The manual link I attached on my previous post talks about Equalizer Systems as the possible manufacturer of the 2007 hydraulic systems.....and they are still alive on line.....might be another company to touch base with?


https://equalizersystems.com/product...acement-parts/

[Stephan_M]

Thanks for the help. Yes the system is integrated powering both the Jack's and the slides. I think one of the solonoids welded shut burning up the motor. The nylon dust cap on the end of the motor is melted and hanging off the end. There are two solonoids mounted to the end of the motor. One is open the other is closed and I can't get it to actuate.

[Stephan_M]

These are the manuals I'm looking for thenka again

[Stephan_M]

Originally Posted by Stephan_M

These are the manuals I'm looking for thenka again

Just an update the leveling slide motor was burned up. Replaced the motor with new. Hooked up started pumping as soon as I hooked up power. Not a nice surprise, bounced head off bottom of slide. Disconnected control wires hooked up power again hooked up slide control wires no pump. Hooked up jacke control wires pump started. All lights illuminated on power gear control panel. Now I know why the motor burned up. Thinking it's either control panel or brain. Any ideas. Help

[Stephan_M]

Just a final update replaced the control panel everything works fine now.

[Tom N3EQF]

Hi Stephan,

Glad to hear you got it fixed! And it's always nice to hear back from the OP once the problem is found - that can be helpful for others with similar issues too.

Tom

[Bob Denman]

Originally Posted by Stephan_M

Just a final update replaced the control panel everything works fine now.

Congratulations!

Glad to see that you're back to:

https://www.youtube.com/watch?v=iUODdPpnxcA