MY 2017 Quantum PD31 has leveling jacks. The right front goes down then comes up about an inch and stays there. This has happened the last 2 times I've been out. The last time it would not retract and I received an error message.
After playing around with the controls I was able to get the jack to retract but the error message remained. Any ides of what I can do
The standard Lippert control panel usually has one of two ways to clear an error message. One is to push all 4 arrow buttons at the same time. The other is to press the Enter and Retract buttons at the same time. (Sometimes the Enter, Retract and Auto Level buttons will also do the trick.) However, if there is an actual problem, the error will reappear.
2016 Thor Hurricane 35C with pups Piper and Annabelle
2013 Ford Fiesta toad
FMCA - F457085
Blog - https://traversity.us
I recently had an error come up on my 2017 Miramar. I quickly found on-line, downloaded, and printed out a Lippert troubleshooting guide for the controller. I quickly cleared the fault, and added the PDF printout to my traveling troubleshooting library. Suggest you do the same.