Axis/Vegas rear wiring harness - mess

[mck67]

Does this look like the standard wiring harness setup under the rear of a 24.1 Vegas?
Looks like it puts some strain on some of the cables.

[JamieGeek]

Yeah that looks about par for the course. On our Axis the wiring to the 7-pin hitch plug was all messed up. May want to check that if you plan to tow.

[mck67]

We tow and our 7-pin connector works. So far so good I guess. I think I'm going to try and support the "bundle" to take the strain off the cables.

[mcr1010]

You may want to check all the wiring, cables etc. underside also and use some wire ties where needed. I used a pkg. of 100 blk 12" ones under the hood, front wheel wells and underside. I may have gone overboard with them, but floppy wires sooner or later cause problems.

[Mr Sunshine]

We saw a 2015 Vegas in a dealer showroom last January that had a lot of loose wiring underneath. When we picked our 2016 up in June, that was the first thing I checked. No loose wiring. Either Thor addressed the problem, or the dealer did. I always have zip ties of varying lengths in with my tools.

[mcr1010]

Could be that Thor is monitoring the forums and picking up some QC tips.