Folks, I have the 2 piece sliding door between the living room area and bedroom. The door use to close and the second half of the door would stay closed behind the first. This trip we would close the door and the second door would continue to follow the first and then leave an opening on the rear end of the doors. Hope this makes sense but it is like a locking or stop device for the second door has broken or come loose somewhere. But I can't find what would control the stopping.
Any ideas? I'll try to get a couple pics if necessary.
Thanks for the ideas. It was the second door bracket on the bottom had become loose and screw fell out. Can't believe Thor expects that door bracket screw to stay there when 1 screw was thru 1/4" or less paneling!!!
To keep from moving bracket went ahead with a small toggle bolt. Hopefully that will hold it.
If it happens again may have to move over inch or so to hit nothing but stud. Thx, Dennis.