Important safety notice -
Check your TS-30 or similar automatic transfer switch wiring connectors!
While installing a 2nd TS-30 between the current one and electrical panel so I can run the fridge and outlets on an inverter, I noticed that Thor uses twist-on caps for their electrical connections, which is a no-no IMHO.
Why, because RV manufactures often join dissimilar wiring, which is what they did with mine, so crimp-on and/or soldered connectors are required.
Sure enough, one of the 3 neutral wires EASILY fell out of its twist-on cap when I was verifying tightness on the caps Thor used. It VERY tricky to ensure a tight, vibration-proof connecting household type hard wiring to 12-volt soft wiring, which is why I use heat shrink solder connections on all of my mobile projects...
I also noticed a bunch of wood-structural issues, but these things are pieces of crap, so it is what it is.
Again, this could have caused a fire. Check everything in these things. I already advised you guys weeks ago about Thor stapling through my bathroom wall and into my PEX tubing.
For a FULL list of necessary repairs and mods also view posts from NewAxisOwner (for some reason they blocked my main account from posting, so I had to open this new one).
__________________
|