Jack

[jlemaster]

Good day all,
I have a 2016 Thor Windsport K27 and looking for anyone that would happen to know how the house battery storage switch is wired? I was working on an issue with my steps and needed to check the step switch. It’s located at the door entrance along with the awning and battery store switch. It didn’t have much play in the wiring harness and as I pulled it up to take a look all the wires on the store switch came off. It has a 6 post on off switch with two red, two white, and two yellow wires. I have tried several combinations and all I seem to manage is to plow the 5 amp fuse at the relay on this circuit. Haven’t been successful in finding any information on the color scheme for this switch. If anyone happens to know or has any suggestions as to where I could find this information I would be grateful.
Thanks

[ducksface]

6 post is easy IF
it has a metal x on the back tying terminals.
Does it?

Google diagram and a $3.49 harbor freight meter.

[jlemaster]

Thanks but it doesn’t have a x.
I do know the two red wires had 12 volts and the white wires are ground. Not sure what the yellow is for.

[16ACE27]

Originally Posted by jlemaster

Thanks but it doesn’t have a x.
I do know the two red wires had 12 volts and the white wires are ground. Not sure what the yellow is for.

To go to your latching relay - they should connect to the center terminals.
You have a red and white on each end, but wired opposite of each other so that voltage is applied to the yellow wires in one direction when the switch is moved one way, and the opposite direction when the switch is moved the other way.
If USE is STORE and STORE is USE, swap the yellow wires.

And you have a 27K, not a K27.


But what does this have to do with a jack?

[jlemaster]

Thanks so very much. That makes sense to me now. I believe I will be able to get it to work now.
You are correct it is 27K. My bad. Jack is my name. First time using this forum. I guess it was subject matter not name.��