Quote:
Originally Posted by Equishell
House battery wiring on 2017 Thor Windsport 35C....does anyone have the correct layout of the wires going to the 2 parallel batteries? A picture of a correctly wired setup would be worth a thousand words.
|
Same as any other pair of 12 volt batteries in parallel.
Now if you don't know what the external cables are for/go to that's a different predicament. If that's the case then you need to trace out the cables:
One common ground should go to a frame connection point.
One cable should go to a 50 amp DC breaker for the house loads through the battery disconnect latching relay.
One cable should go to a 100 amp DC breaker for the hydraulic levelers motor and generator starting.
One should go to one side of your BIM or Trombetts solenoid.
If you have an inverter, one should go to a large DC breaker or Fuse/Fusible link for the inverter. There may also be a separate ground wire going to the inverter.