No Shore or Gen power..

[Bama57]

OK...no AC power on shore or generator...2017 29h Outlaw...breakers are all good at panel...any suggestions?

[16ACE27]

Transfer switch wiring is loose: a Thor standard.

[Mo_Mike]

Check the wirenuts in the transfer switch

Ours were loose and arced then melted the connections.

Rewired the connections and everything has been good since

[Bama57]

Loose wire at panel...gezzz...this thing just keeps on giving...

[16ACE27]

Actually in the panel? Or from the transfer switch to the panel? That's where it's normally loose as Mike said, the wirenuts.

[nosticks]

Yep, Check my post "Transfer Switch Meltdown". Wire nuts should not be used in any situation on an RV.

[Tearstone]

Originally Posted by nosticks

Yep, Check my post "Transfer Switch Meltdown". Wire nuts should not be used in any situation on an RV.

Link to reference post: http://www.thorforums.com/forums/f4/...own-10516.html

[Mo_Mike]

Originally Posted by Tearstone

Link to reference post: http://www.thorforums.com/forums/f4/...own-10516.html

Of course, the fun comes trying to find the transfer switch. Was on the phone with THOR for three hours since it wasn't where they said it should be.

But, did learn a lot about my coach....(grin,)

[Bob Denman]

Originally Posted by Bama57

Loose wire at panel...gezzz...this thing just keeps on giving...

Is everything else checking out okay?

[Bama57]

Just the usual stuff Bob... everything is out of level..stove about 1 inche...one side of the awning bracket not plumb..the exterior vent cover for stove not level...starting a go fund me page to purchase pocket levels for Thor assembly employees...

[Bob Denman]

I'll be happy to throw a couple bucks to you, for such a greatly-needed item!

[Bama57]

Is this a Thor product? Probably a loose wire!
http://m.fox8live.com/wvuefox8/db/37...xDe3dj/gallery

[Tearstone]

Originally Posted by Bama57

Is this a Thor product? Probably a loose wire!
WVUE

That link didn't work.

On our Miramar, we have an automatic transfer switch. I'm assuming we might be off the hook on this transfer switch loose wiring issue.

[Bama57]

http://m.fox8live.com/wvuefox8/db/37...ntent/XbxDe3dj

[Tearstone]

Originally Posted by Bama57

WVUE : Alabama fan's RV catches fire near Superdome while in town for Sugar Bowl

That's one quick way to heat it up.

[Bama57]

On a positive note...did receive my Kidde replacement fire extinguishers..maybe just in time!

[Bama57]

Originally Posted by Tearstone

That link didn't work.

On our Miramar, we have an automatic transfer switch. I'm assuming we might be off the hook on this transfer switch loose wiring issue.

The automatic switches are the ones with loose wires...

[nosticks]

Terastone, No you are not off the hook. In addition to your Automatic Transfer Switch, your water heater is also installed with wire nuts.

[Tearstone]

Originally Posted by nosticks

Terastone, No you are not off the hook. In addition to your Automatic Transfer Switch, your water heater is also installed with wire nuts.

OH boy. Ok, so the recommendation is to replace the wire nuts with inline connectors with weather proof ends?

I don't know where all these connections are exactly, but I'll go fishing for them.

On a slightly related note. My water pump did use the yellow inline connectors but the water pump wire slipped out of the connector. I did replace it with a fresh connector and melted the ends for stability and weatherproofing.

What I was asking for before, was pictures to aid in determining exactly where these connections are in relation to the appliances themselves.

[SuperD]

Originally Posted by Tearstone

OH boy. Ok, so the recommendation is to replace the wire nuts with inline connectors with weather proof ends?

What I was asking for before, was pictures to aid in determining exactly where these connections are in relation to the appliances themselves.

They’re everywhere, they’re everywhere!!!