Slide out molding

[jrm8687]

Hi. First time needing help. I have a 2018 ACE 27.2 purchased new. On our last trip I had the drivers seat back in a more prone position. When closing the front slider, the vertical moulding on the right side rubbed against the seat back and damaged the moulding ( which isn’t real wood). I have tried to find the same pattern moulding to replace it with no luck. Is this something that can be ordered though Thor or a Thor dealer ?
Thanks for any advice.
Joe

[EA37TS]

Originally Posted by jrm8687

Hi. First time needing help. I have a 2018 ACE 27.2 purchased new. On our last trip I had the drivers seat back in a more prone position. When closing the front slider, the vertical moulding on the right side rubbed against the seat back and damaged the moulding ( which isn’t real wood). I have tried to find the same pattern moulding to replace it with no luck. Is this something that can be ordered though Thor or a Thor dealer ?
Thanks for any advice.
Joe

Thor dealer should be able to get it for you

[Chateau_Nomad]

It is held on with staples. When you get the new one, consider attaching it with heavy duty Velcro so it can be removed when needed.

I did a modification to allow the driver seat to move further back. I'm 6'1" and driving was extremely cramped. I leave the trim piece off while driving, then reattach it to the Velcro when the slide is out. You can't tell it's on there with Velcro instead of permanently attached.

[jrm8687]

Thanks. Good idea when I can find new moulding.