So we had an issue where I think someone fell against the sliding door to the rear of bedroom of the RV. The sliding door is 2 parts, and the part that stays closest to where they store when pushed back had come apart on the bottom. I think they are made out of recycled cardboard or something else.
First I tried gluing in the broken parts back in. That did not last.
So I removed it. They have latches on the top that swing open and then you can remove it from the upper slides.
Photos of the project.
https://photos.app.goo.gl/X8hhkkM1GQW8FJuD6
The first photo is how messed up it is.
To fix this I made a metal L that bolted through the door using 'chicago bolts'. I used the existing bottom chunk of metal and welded a tab along the side.
Door works fine now. If you have questions after looking at my photos please ask.
Finished Product: