Tire filling, Valves, Compressor, TPMS

[BC1]

Oh yeah, I've already thought of more than a few things I'll be adding to my Ryobi 18V collection. Maybe this wasn't the best idea after all for my wallet LOL.

[Hugh.vines@att.net]

Is there any danger of putting extensions on inner tire being cut by outer tire

[puppygeo]

We went with Dually Valve stems which replace the ENTIRE stem and IMO reduce points of failure that comes with adding am extender to existing valves.
https://www.shinyrv.com/product-cate...s-mfg-by-borg/

I am also using this air compressor and am very happy with it. https://smile.amazon.com/gp/product/B08BRT1N1P

[alajeu]

Thanks OldWeb:
I have often had problems following links from other members. Now you have fixed it. I didn't know you had to be logged in. Tried that and it worked
alajeu

[OldWEB]

Originally Posted by alajeu

Thanks OldWeb:
I have often had problems following links from other members. Now you have fixed it. I didn't know you had to be logged in. Tried that and it worked
alajeu

Yer welcome! Another way to not log in is to right-click the link and "Copy Link Location" then open a new Tab/Page and paste it in the location bar, hit Enter. Usually works but there is the odd one (typically Amazon ones) that will not.

[jazzmann]

Thanks to Oldweb for suggesting you log in first in order to have links work. I've had many links not work on my Windows 10 laptop over the last few months on this forum and thought something must be wrong with the link. After not being able to open the suggested links on this post and then seeing the suggestion from Oldweb, I logged in and lo and behold - working links! Learned a good thing today, thanks all!

[Bob Denman]

Originally Posted by Hugh.vines@att.net

Is there any danger of putting extensions on inner tire being cut by outer tire

Only if the outer tire explodes, and tears it loose...

[BC1]

Well that was too easy - while I'm waiting to see if I am able to keep the RV all my tire filling/checking pieces came in. I ordered a bunch of different things figuring I could get a combo of the to work on all tires. Surprisingly, the inner dual tires were super easy. Keep in mind, I am just using these to check and fill, I AM NOT leaving them on. I just removed the wheel cover and screwed the longer piece in the picture on the inner dual (didn't require any hand maneuvering at all) then just used my cheap car tire gauge to check and it read exactly what I thought it should. I also used a more expensive gauge too and it read the same. There is too much snow around to get out the compressor and fill but I don't expect a problem. On the back outer dual tire I used the smaller piece in the picture and got a good pressure reading with that and the front is ok w/out the wheel cover on. The black one is flexible so it conforms to the space/situation.