kitchen sprayer

[ggoguen]

I have a Daybreak 32HD, my water pressure is fine everywhere, shower, bath, kitchen sink, but the sprayer on the kitchen sink just dribbles out water. Does someone know of a fix, or do I remove it and install a soap dispenser?

[Bob Denman]

You probably just have something clogging it up...
Can you take it out, and give it a good cleaning?

[Calman]

Unscrew the nozzle and check the filter/screen.

[ggoguen]

I'll try to clean it, and see if it helps.

Thanks

[Bob Denman]

Good luck!

[pstandiford]

They can be prone to kinking also.

[Beau388]

Originally Posted by pstandiford

They can be prone to kinking also.

Yep look under the sink and 99% of the time is is kinked closed where the weight hangs when the sprayer is stored. The fix is to reinforce that section of hose. I used some 3/8" wire loom.

[lwmcguire]

Originally Posted by Bob Denman

You probably just have something clogging it up...
Can you take it out, and give it a good cleaning?

Per another thread on here, ours was almost plugged up solid when we did the PDI

Like you noted, unscrew and clean the screen and flush the line for a minute or so before installing the screen