Wheel cover removal for 2020 Thor four winds 22e

[Bobdole]

I can’t find anything out there about this.. I need to remove all 4 wheel covers to install valve caps for a tpms. The individual bolt covers (all 8 of them) just turn and don’t come off. Is this a hub cap or a wheel simulator? Do I pry each individual caps off or do I pry off the entire hub cap from the outer edge? I do not have the two “real bolts” that everyone else seems to have. I don’t want to damage anything taking them off. Please help. Thanks.

[16ACE27]

A picture of what you have may elicit valuable results instead of guesses.

[bry899]

Originally Posted by Bobdole

I can’t find anything out there about this.. I need to remove all 4 wheel covers to install valve caps for a tpms. The individual bolt covers (all 8 of them) just turn and don’t come off. Is this a hub cap or a wheel simulator? Do I pry each individual caps off or do I pry off the entire hub cap from the outer edge? I do not have the two “real bolts” that everyone else seems to have. I don’t want to damage anything taking them off. Please help. Thanks.

They are 1 solid hub cap that gets pried off from the outer edge, No Bolts
I have a 2018 Four Winds 22E.

[Bobdole]

Originally Posted by bry899

They are 1 solid hub cap that gets pried off from the outer edge, No Bolts

I have a 2018 Four Winds 22E.

Thanks. That’s what I figured but didn’t want to start prying without knowing. Here are some pictures for anyone wanting to see them. They look identical to wheel simulators. It also doesn’t help that the bolt covers actually turn..