Thor Forums

Thor Forums (https://www.thorforums.com/forums/)
-   Class A Motor Coach (https://www.thorforums.com/forums/f17/)
-   -   ACE 30.1 schematics (https://www.thorforums.com/forums/f17/ace-30-1-schematics-2177.html)

ipagan54 08-25-2015 02:34 AM

ACE 30.1 schematics
 
3 Attachment(s)
Hello, following the suggestion of some posts here, I requested some schematics of our new ACE 30.1 from THOR. They do not have anything specific to my coach, but they did send 3 files of the general layout of the electrical, plumbing, and waste/ ext shower. I will upload these for those who may be interested.

Daveht 08-25-2015 04:29 PM

Thank you for the schematics! It does help a little, but some of them are old. Thor not documenting thier material again with current material!

airforcehero 08-30-2015 01:00 AM

Hello...any idea where I can get the wiring diagram for the tow wire harness and the brake controller harness in the dash on a 2016 29.3 would you? we just bought it a couple of weeks ago and it only came with a flat 4 connector. Thank you...Fred

Daveht 08-30-2015 03:09 AM

Quote:

Originally Posted by airforcehero (Post 16994)
Hello...any idea where I can get the wiring diagram for the tow wire harness and the brake controller harness in the dash on a 2016 29.3 would you? we just bought it a couple of weeks ago and it only came with a flat 4 connector. Thank you...Fred


I had my Roadmaster setup done by Campers World. The kit comes with the new wiring setup.

Hope this helps!

West 08-30-2015 05:30 PM

Quote:

Originally Posted by airforcehero (Post 16994)
Hello...any idea where I can get the wiring diagram for the tow wire harness and the brake controller harness in the dash on a 2016 29.3 would you? we just bought it a couple of weeks ago and it only came with a flat 4 connector. Thank you...Fred

I assume yours is a Ford F53 chassis like mine. In my owners manuals there was a plastic bag that had the adaptor for the brake wiring under the dash. I ended up not using it and bought a direct plug and play adaptor for my Prodigy brake controller. It's just an older ford style plug. Ford only has two types of I remember correctly and it's the one for the older models.

Then under the back end all the wires you will need are located there you just need to tie into them. The only one I added that isn't a must is a constant 12v from the batterie to power the lights inside my cargo trailer.


All times are GMT. The time now is 08:37 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2