Thor Forums

Thor Forums (
-   Thor Owners Community Discussions (
-   -   More good mfg. Quality Control from Thor (

nosticks 12-12-2016 10:14 PM

More good mfg. Quality Control from Thor
2 Attachment(s)
I removed the platform top on the miserable corner berth to gain access to run wiring for some badly needed outlets. Now I know why the berth is so cold. Other than debris from manufacturing and a double bubble bubble gum wrapper, most of the foam insulation is missing. What is there is glued down.

Bathroom wall side:
Attachment 3510

Attachment 3511

paullewin 12-12-2016 10:31 PM

Wow! Unbelievable. I have a Freedom Elite 23h which is your exact model. Please share with us the wiring you are going to perform. Are you putting 110v receptacles and/or 12 volt receptacles? I will be doing the same thing. Let me know...

nosticks 12-12-2016 11:28 PM

110v and 12v. I put a 12v under the forward most berth cabinet. The cabinet is thick enough in the base to allow flush mounting. It is for an asthma nebula tor. 110v in the galley between the range hood outside wall and refer cabinet. 110v dinette side of hanging locker. 110v on driver side dinette base facing forward.

paullewin 12-13-2016 02:07 AM

Good to hear! Could you provide pictures please? I want to do the same setup as you... Thank you!!!

All times are GMT. The time now is 08:09 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0 PL2