Quote:
Originally Posted by Shawn62
Discovered today that sometime in the last 1200 miles the right side bushing clip on my rear anti sway bar loosened up. The top bolt is gone. Looks like the clip is bent. I removed the bottom bolt with my fingers. I will check to see if the Ford warranty covers this. Only 6900 miles on chassis. Just goes to show how important it is to crawl under and inspect these beasts on a regular basis. I am wintering in Florida near New Smyrna Beach. Could anybody recommend a Ford truck service center in the area?
|
Shawn,
This has been a problem for some time but normally it effect older models. You really dont need to take it to ford. Just take the remaining bolt to a good hardware stote and match it. Get a high grade bolt. Grade 8 US or 10.9 metric No cheap home depot bolt
The nut is welded to the frame so all you need to do is just screw the new bolt in. Use blue loctite and torque to 66 ft lbs
It looks like your bushing is still in good shape. If its torn up go to irv2.com and search for Skuterdude. He sells them and they are top quality.
Jerry