Quote:
Originally Posted by Shawn62
Thanks Jerry,
I will give that a try. The bushing doesn't look bad. I hope when I set everything in place I can get the bolts started and tighten things up. I wasn't sure if the clip had to be in a uniform "U" shape before I installed it. Thought it might deform the bushing. Might have to re bend the clip before I re use it. Are you using 66 ft pounds as a standard for the size of the bolt?
Shawn
|
Shawn, I found the same situation on my 2016 with less than 4K miles on it. However, my U-strap was badly bent. $60 bucks and I had a new strap and 2 bolts, 30 minutes later was completed.
It really made a difference in the drive when the rear sway bar was connected properly. While I was under there, I also moved the end links to the most stiff position.
Recie
Thor Forums
