Thor Forums

[Kenosfan]

The removable table has a metal connector with several screws but it’s screws are attached to the underside of the table top which is really soft compressed board. The top when you remove it pulls the screws out easily! I fixed mine and it’s easy I hope this will help someone! I turned it over and of course took the screws out and released the metal pieces probably it’s already came off. I took a wide piece of paper and made a template of the underside. I went to Lowe’s and purchased a thin piece of finished plywood. Used the template and marked it then cut it out. I glued the plywood to the underside of the top then put the metal connector and screwed it into the plywood with the same screws. Wouldn’t have that problem again. I don’t know how Thor thought that was going to hold up? They need to fix that design just like I did