Quote:
Originally Posted by dstankov
There is a 100 Amp breaker (Left side center red dot in the previously posted picture) which has 2 cables coming off the output side. One cable (black wire) runs directly to the leveling jack motor and the other cable (orange), I believe from looking at the way the harness runs, goes to the 12V input side of my Xantrex inverter (2 compartments to the rear). If I get time today I'll go out to the coach and trip the breaker to see what systems go down. If I am correct that brings up another issue in that the recommended breaker/fuse for the input side of the inverter is 250 Amp.
|
I was wrong
, the orange cable coming off the 100 Amp breaker provides the 12V input to the generator starting circuitry. So that breaker controls power to the leveling jacks and the generator. If I trip the breaker all other systems work.