I guess I should have looked closer... Another one was split on the inside but not completely separated... Good thing I ordered 4 spared from Kodiak, I have already used 3 and the ones from DRV were a no show.....
rynosback, they are heavy plastic and the standard ones from Kodiak are clear to see the oil level in the hubs. These are white to let you know you have a greased hub. They torque to 20-30 ft/lbs so they are not too delicate but will NOT take 70 or 80 ft/lbs....
It will take a 2 3/16 socket and I had to use a 3/4 drive socket with 2 step downs to get to 3/8 where I could use a little 3/8 torque wrench and yes, I torqued those puppies to 25 ft/lbs to prevent another popped off flange. Engineers have specs for a reason.
__________________
|