Thor Forums

[EA37TS]

Well it has been a few days since I received the seal but it has been installed.

Originally I thought it would be a PITA but it turned out to be a relatively simple procedure when the seal is combined with some shampoo for lubricant and some strong fingers for pulling.

I had thought I would have to remove the trim around the slide, however, retracting the slide about 4 inches allowed me to get my hand in far enough to grip the slide and pull while guiding the top part of the slide onto the wipe seal's track. The channel in the wipe seal is what serves as the wire chase when the bulb seal is installed onto the wipe seal.

Now, not only is the wire secure, but the slide no longer extend about an inch further on that side.