04-19-2018, 04:42 AM
|
#29
|
Member
State: California
Posts: 73
THOR #6557
|
Quote:
Originally Posted by sidewinder
we have a 25.2;
i started with a cardboard circle same as diameter of tire. Mounted to some 1/2 x 3 wood. Attached 3” butt hinge. Clamped hinge to frame cross member, attached a simple sliding latch to opposite end of wood member. This allowed me to easily move the cardboard model around in space. Because there is a number of wires coming down through the floor on the driver side i needed to move the whole assembly about 3” to the passenger side.
I ordered the steel flat stock yesterday, if anyone is interested i will post pictures of manufacture and bom.
|
__________________
|
|
|