Quote:
Originally Posted by PictureTheSouth
...
Filled up the fresh water tank for the first time since we'll boondock one night enroute. Well water, Culligan treated, plus run through a new in-line filter, and added about 3 oz of bleach per other posters recommendations. Took longer than expected, but so far so good.
Tested to make sure all in working order - water pump, toilet, both sinks. Probably ran about a gallon, more or less. First observation - water seemed "soapier" with more of a chlorine odor than that small amount of bleach should have made. Thought maybe need to run for a while longer to clear the lines, but then made second observation.
Second observation - indicator panel now shows the Gray Water tank at 3/4 full. (showed empty prior) Pretty sure that tank should hold more than two gallons, so what is the communities thoughts?
Do we have a bad tank sensor?
...
|
Tank sensors are notoriously 'bad'... Won't say defective - they just don't work well... You will learn how long you can go between dumping.
Did you flush the system completely after adding bleach? It takes a bit to get that out.
No connections between fresh water and gray tank... water must leave a faucet and enter a drain to get there.