I should have had another photo.
The inverter is mounted inside the bench.
I use the 12V plug to plug in my laptop power.
The switch is the disconnect for the tabletop power
My thinking was two fold.
I wanted to keep power consumption as low as possible, and I aready had the 12V charger for my laptop and the 100W inverter for the outlets.
100W isn't much but it lets me drive a 24" tv/Monitor which peaks at 25W
The lap top charger draws about 150W at 12 V.
It will be simple enough to upsize the inverter later if I feel the need.
I might do the same setup for the over the cab TV/DVD. In which case I'll re-purpose the 100W inverter and buy a bigger one for the bench.
]
Thor Forums
