That's the problem I had also battery disconnect off use store switch on store and I still had power
Well I called the company that manufactured the Bim I was told you can't break the ground cable you have to break it at the positive cable. If you break it at the negative cable the Bim senses 0 voltage to the batteries and will cause the chassis batteries to send power over. that's why the lights we're coming on
So now that I broke the power at that 50 amp fuse everything works like it's supposed to
I don't think you had any problem with your BIM or the emergency start button it was just that you are interrupting the ground power and that's the problem
Jerry
|