Best Way or Product to Prevent return of Mold on Awning
Greetings,
I just spent the last 2 1/2 hours cleaning the mold from the awning of our 3 year old Vegas 24.1 (both on the topside and the underside).
The procedure involved a power pressure washer set at 1500PSI, half a gallon of "Awsome", safety glasses, a folding step ladder and a long handled scrub brush.
The final "scrub down" required 4 Mr. Clean Magic Erasers followed by a heavy rinse cycle. Please note, using a 2"X4" Mr. Clean Magic Eraser by hand on a 18'X8' awning (both sides mind you) makes you wonder what was so "Magical" about the experience.
Now that the deed is done and the awning looks like new I am hoping that some of the more senior RVer's can advise as to products to protect the awning from a regrowth of the mold...or an easier way to remove it!
Our next awning will not be white on the underside.
DocReott
__________________
Sheree & Michael NCNG LTC(ret) with Munpi, RC and Sheba (cat).
2019 Nexus Viper 27V, E-450, 5 speed "Ms. Enterprise", Infotainment Center, HUD, , Safe-T-Plus, Curt SpareTire Mount, ext. WiFi Antenna, Roadmaster Tow Sys& Invisibrake.
|