Wet controller board. Same thing happened to us a few weeks ago. I took the board out and drilled weep holes in the plastic mount underneath to give the water a chance to run out and after the board dried, put it back and it has worked fine since. At some point I will replace the stock controller board with a Dinosaur Electronics Universal Igniter Board with Fan Control (part FAN50PLUS) as it won't keep bringing the fan on continuous run if something happens. It is also sealed against casual rain, etc. It is around $100 on Amazon.
__________________
John
2016 Thor Hurricane 35C with pups Piper and Annabelle
2013 Ford Fiesta toad
FMCA - F457085
Blog - https://traversity.us
|