|
That error code is somewhat of a misnomer. E05 = low voltage detected but OL = overload, which means that your rated load managed to get above the tripping point for the inverter or in general it had a short somewhere in the output wiring. It sounds like the error was corrected (or just a temporary condition) and after you turned the inverter off and then back on again the error condition cleared.
In many cases, when you see that error, it means that internal components of the inverter have gone bad (like what happened with ours) and it needs to be replaced. Glad yours doesn't!
__________________
John
2016 Thor Hurricane 35C with pups Piper and Annabelle
2013 Ford Fiesta toad
FMCA - F457085
Blog - https://traversity.us
|
Thor Forums
