You will have to have good access to the inverter/converter as there will be several heavy duty wires plus the Romex coming into and leaving the device. You can just remove your old converter/charger or just disconnect it, but the inverter/converter probably will not fit there.
My 1,000 watt inverter is about twice the size of the converter/charger, and because of the heat the inverter produces, it is in a large compartment. If the inverter is 90% efficient and producing a 2,000 watt output, then 200 watts is going into heat. Ever get your hand close to a 200 watt incandescent light bulb?
__________________
Jim & Roy Davis
2016 Hurricane 31S
1961 Rampside in tow
|