Quote:
Originally Posted by Diemaster
YES! THANK YOU! i was just about to post the same thing about our four winds 31E.
are you sure the part after the gray/black valves rotates downward? i tried to move mine but it looks like it's glued in place straight out (the compartment door has to be open for any hose connected, even the garden hose for the black sprinkler)
|
Just loosen the bolts that the clamp the knife valves to the pipe adapters until it moves relatively easily. Put some water in each tank with the valves closed and check for leaks. If it leaks, tighten slightly. If you get ambitious, you can remove the bolts and nuts, slide the pipe adapters back and grease the "O" rings with silicone grease (no oil based grease) and re-clamp.