Quote:
Originally Posted by Oneilkeys
Here is a pic from the other side. Plexiglass is attached with three bolts thru the cabinet at the top and three screws thu the shower pan along with liquid nails at the bottom. The plexiglass is attached to a 1"X1" at the back and glued to the wall. Then siliconed all around with a bead at the front edge so the water does not run down the top of the shower pan and on to the floor. Another similar bead where the sink cabinet from edge meets the shower pan.
|
We just purchased our 24.1, have not used it yet but interested if your shower modifications have worked because we can see a need to do the same.
Thanks
Thor Forums
