Quote:
Originally Posted by Beau388
The error is telling the differences hall effect are out of tolerance, just if one was grounded. Any time one motor stops and the other keeps on turning you will get that error. Why it showed up on both controllers, not a clue.
|
Sometimes I get lucky. Thinking about it more and why both controllers showed the error. When I extended the room slide it didn’t budge at first; I hit retract and it moved ever so slightly; heard the motor turn just a bit, then worked fine. Wonder now if seeing the error on both controllers was simply because both were slightly “out”. Just a coincidence that it happened at the same time. Thanks for the explanation, big help.