Quote:
Originally Posted by JamieGeek
Trying to think if there is a configuration of the water heater bypass valves that would result with this: The only thing I can think of is that all 3 of the valves are open. Which model Axis do you have? If its a 24.1 pull off the cold air return vent under the fridge and look at your bypass valves. If the middle one is open (the one that runs between hot and cold) close it.
|
Thanks for this info., again, Jamie ! During our trip in July, we experienced a problem with our hot water...got fouled by Sulphur water...we have it cleared out...however, when we turn on the hot water, we get about 20 seconds of water then air. Perhaps we left that valve open ?