Quote:
Originally Posted by Oneilkeys
Final mod was a Clean Dump install in the waste dump cabinet. Everything fits except being able to turn the 3” pipe from the discharge to the pump. To make that turn I had to cut the end off of the compartment (below the on/off switch and circuit breaker). I bought a small storage container and fastened it to the end of the compartment to make the compartment long enough for the hose to turn. The hose detaches with a half turn and I cut a hole in the compartment below the attach point so if I have a pump failure, I just have to unattached it and I can use a regular hose. I have been using on of these systems for four years and have never had a problem.. I wired it to the battery cut off switch thru a 20amp breaker and a redundant on/off switch. No more messy hoses. Open the valve, turn on the pump and empty your tanks in a few minutes.
|
I am a newbie and would love to understand what you did here. Seems like an excellent solution to a messy problem.
Thanks!
Thor Forums
