Yeah I notice the wiring harness seems very long. Might sorten some. I have not decided where to put the central pump box yet. Might put under the frame beneath the drivers side like the recommend or under the Passenger side.
They also sent a plastic box that you can put the inside controller in. I might either use that and just velco out of the way and when I use it just hold in hand from the cockpit area. Or I could put in in one of the cargo bay areas and hold by hand while I watch what is going on with the jack (I Like the idea of watching them - esp if I stack some block for additional clearance). Or mount to the wall on the DS of the cockpit since the dash on the Axis / Vegas is very wimpy - no back support on the lower part so when you push the buttons the dash will move in an inch or two or you have to told the dash with one hand while pressing with the other.
I figure I would decide on this once everything else is done.
I just hope the new drill bits do the trick.
__________________
2017 Axis / 25.4: Big Foot Levelers, Aims 1200 Watt inverter, Ceramic Window Tint, Full River AGM 6V batteries, Front Hellwig Sway bar / Rear Track Arm, Safe T Plus Steering Stabilizer, PD 4655 converter, Hard Wired Surge Guard, WEboost + WiFi Ranger, LED Headlights/Driving lights, TPMS, Surge tank, Tornado flush, Viair Compressor
|