Quote:
Originally Posted by Metalman
Can you plug both motors directly to a battery to see if they work?
|
Both motors work fine. THe problem is the motor doesn't shut off when fully retracted. Well it shuts off after 5-10 seconds.
Tech said when the step is fully in (retracted) or out it causes a spike in the amps which tells the controller to stop power. Motor doesn't stop causing the ratcheting of the gears. Because it doesn't stop it causes the motor to heat up a bit which causes the amps to go up. This again tells the controller to stop power.
THis is what was explained to me by the tech. Ill change the control box and see what happens
Jerry