Quote:
Originally Posted by DinoC41
Well guys, the Electrical Gremlin got me this past weekend!! We have the 2017 Windsport 29M, 50 amp motorhome and our problem occurred in a junction box located between the generator and Auto Transfer Switch (ATS). Once again, it looks like a winged wire connector loosen and created an arc in the box which fried the connection of the generator and the ATS. Went to Lowes to get another junction box and parts. While there I asked if I could use butt connectors instead of using winged wire connectors and was told that would work too so that is what I did. Please check your electrical connections on a regular basis...dropping the mic!!!
 |
New (4 months) 2018 29M
Spent the day checking out a bunch of the things I have picked up from on this site.
Overall it was better than I was expecting:
- not holes or openings to have to seal up.
- I was able to access the shower base and inset another floor support.
- CHF is done front and back (what a difference)
The main surprise was the genny junction box. Mine is in a plastic box with the connections all taped up. Didn't have time to check under the tape as it was getting dark. Will do that tomorrow.
Main issue was that there was NO cover on the junction box. (see pic attached). Any insights or suggestions.
Thor Forums
