Quote:
Originally Posted by dave.irwin.59@gmail.com
New (4 months) 2018 29M
Spent the day checking out a bunch of the things I have picked up from on this site.
Overall it was better than I was expecting:
- not holes or openings to have to seal up.
- I was able to access the shower base and inset another floor support.
- CHF is done front and back (what a difference)
The main surprise was the genny junction box. Mine is in a plastic box with the connections all taped up. Didn't have time to check under the tape as it was getting dark. Will do that tomorrow.
Main issue was that there was NO cover on the junction box. (see pic attached). Any insights or suggestions.
Attachment 13688 |
I had the same issue om my 2018 29M. No cover. It was left inside the generator and was stuck betwenn the generator and the wall.
Thor Forums
