Quote:
Originally Posted by axis earl
I would say that they are really not "flush mount" because there are the rectangular openings cut specifically for the original taillights. Just remember that those stick on LED strips that Rev installed are probably not legal replacements. Here in CA, non-approved lighting pretty much guaranteed you were going to get a citation. Now, you can pretty much ignore that aspect because enforcement seems to be nonexistent. There are many choices on the internet including true flush mounts that could be wired but I would suggest that you stick with the LED approach because of their performance lighting wise and low amp use.
|
Day light installed look. I did use double light LED strip. Red & Clear 4 backup.
__________________
Rev. Jeffrey 2017 Thor Axis 24.1 E450 Windjammer.
Silver Safe-T-Plus Steering Control
SSF-106-40 SumoSprings Solo Front Bump Stop SSR-107-47 SumoSprings Rear Bump Stop
Hellwig 7718 Front Sway Bar & 7180 Rear Sway Bar
Koni FSD Front Shocks 8805-1042 / Koni FSD Rear Shocks 8805-1043
|