Quote:
Originally Posted by Long & Winding road
I would think the rubber would be on the outside (because the slide should push it out when extended).
Check to see if something is holding it back or if you need to trim the bottom of the seal so it is free to move in and out with the slide.
Also check the top seal (Under the awning) and the bottom seal (under the slid). Seems like someone posted a problem with one of these seals in the past.
One post also had a leak on the bottom due to poor caulking job on the trim around the slide (the Trim peice that surround the slide and has the extra seal on it when closed). So check any caulking points.
Let us know what you find so we can let other know.
|
Thanks for the ideas, I need to figure out if the bottom slide gear track is above or below the bed . Don't have a clue how these are put together