Quote:
Originally Posted by wingnut60
Ron,
Thank you for the clarification--hope Don is still around and reading this. My RSSA has the flange on the nut so must be the 6050...would save about $1000 on a changeout.
Older Suites could have had the 1/2 or 9/16" lugs, depending on the brake/axle size. Did not know the newer ones had the 5/8" lugs.
Joe
|
Our 07.5 MS had 8k axles but the studs were 9/16". I went to 17.5 Aloca's from 16". To get Alcoa's high enough rated the holes had to be 5/8. So I bought 5/8 wheel studs from Kodiak and swapped them with the existing 9/16. I bought the mounted and balanced GY "H" tires on the 17.5" Alcoa's from TrailerTiresAndWheels.com.
Thor Forums
