Quote:
Originally Posted by Warhouse
We weren't happy with the Thor issue smoked glass range top cover our 29M came with. After looking at aftermarket cutting boards that are meant to cover the range top, but must be stowed when using the burners, I decided to craft my own.
I removed the folding glass cover. Found a 20"x24"x3/4" hardwood cutting board and cut it to the exact dimensions (with radius's in back corners) as the stove top metal frame where the glass cover seated. I then cut it in half width wise and placed a S/S piano type hinge at that cut, so the CB would fold in half for storing when using stove top for cooking. I utilized the existing rear hinge hardware to securely mount the CB to the range frame with 2 S/S screws. Attached a piece of the trimmed off CB to make a 1" flange in the front to match the sink edge. Cut small clear plastic bumpers (2) and attached to metal frame where the forward CB rested to eliminate any rattles. Came out very clean and functional, more importantly my wife loves it!! Photo's attached to show more detail.
|
Very nice. Might need to copy this
Jerry
|
Thor Forums
