Quote:
Originally Posted by mgianni
Nothing is flashing so I will give it a try, just to be clear will it start flashing when anything goes wrong with the slide? Before I overrode it was flashing and then I got it in and there was no flashing.
|
If something goes wrong the controller should flash. If you disconnected the motor from the controller to push the slide in you may have reset the code. Trying to sync the slide may again find the error and if so the controller may start flashing again. If it does count the number of red flashes sandwiched between green flashes and that will indicate the error.
If you are lucky, and hopefully this is the case, syncing the slide will solve your problem.