Oh how I appreciate the good-natured folks in this forum, thank you DenverTransplant also Long & Winding Road for your input.
The Tech at AIMS did say the 2AWG would be better for less voltage drop on longer runs. On the new Progressive Dynamics 4655 converter, the DC board is only fused with 30 amp and there is not an additional terminal to run a positive wire from anyway. After having remeasured the run will only be about 6 feet or less from battery bank to where I can mount the inverter behind the cabinet.
This seems to be turning into a spring project for me as it is too
here in Michigan to be crawling under the rig to route these new cables!
Surely we will find other fixes LOL
. Not going to even mention (all the wiring issues) discovered when installing the 4655.
Thor Forums
