|
Slide doesn't extend
We have a 31E with a Lippert slide and have a code of eight flashes or wire short between motor and controller. I have two spare motors (500:1) and I plugged both in from inside the coach as the slide is in, both run fine when I extend and retract obviously no load on them.
My question is I'm assuming one of the motors is bad but no green flash on the controller? I thought a green flash identified a bad motor?
Second question is how do I extend the slide to change the motor? Do I disconnect the controller and pull? I can't disconnect the motors with the slide in.
Thanks
__________________
|
Thor Forums
