Quote:
Originally Posted by Mo_Mike
One question, do you have to have the inverter "on" for the transfer switch to "work" and pass 120v from Generator or Shore?
Also, thanks for the insite on looking for non-GFI outlets. Was not aware that the two by the bed were non-GFI
|
Yes, Inverter must be in the ON position for transfer switch to operate
But remember...the inverter isn’t actually running once the transfer switch senses 110 volts from shore power. It only acts as a conduit
Inverter automatically runs to provide 1200 watts of AC power only when it no longer senses 110 volt source from your shore power