Quote:
Originally Posted by javelin
|
I did all of that. On the tops and sides of my frameless windows, I used marine under-water adhesive sealant. I then covered over the sealant with blue painters tape and it sat for 5 days before coming off (see attached AC plug cover, which was soaking wet wood inside when I noticed it had one if those garbage thin, foam gaskets, leaving a 1/8th inch air/water gap.
MY worry is where water is going on the passenger and drivers frameless windows bottom slide areas. (see pics). The water goes under the rubber flap where the window slides, yet the entire bottom frame is sealed, with no bottom weep holes.
Anyone?
Thor Forums
